01
CENTRAL HVAC
Central Air Conditioning & Chilled Water Systems
Engineering support for central HVAC applications, chilled water systems and large-scale cooling requirements.
HVAC ENGINEERING & CONSULTING
Engineering Better Cooling.
Expert HVAC engineering and consulting for efficient, sustainable and high-performance cooling and heating systems.
Geothermal
HVAC Optimization
Energy Efficiency
Technical Consulting
Independent HVAC expertise for complex cooling challenges.
GEOTHERMAL HVAC
01
BUILDING
02
HEAT PUMP
03
GROUND LOOP
GROUND-SOURCE
THERMAL EXCHANGE
→
SUSTAINABLE
COOLING STRATEGY
HVAC SYSTEM ASSESSMENT
Is Your HVAC System Performing as It Should?
Not cooling enough? Consuming too much electricity? Getting old? Or simply not performing the way it used to?
Green Chill Tech provides independent technical assessment and HVAC consulting to understand what is actually wrong — before you spend money on replacement.
01
Not Cooling Properly?
We investigate the technical reasons behind poor system performance instead of assuming replacement is the answer.
02
Electricity Consumption Too High?
We assess system operation and identify potential areas for energy optimization.
03
System Getting Old?
We evaluate whether the existing system can be optimized, retrofitted or should be considered for replacement.
04
Frequent Breakdowns?
Technical diagnosis helps identify underlying causes and possible corrective approaches.
OUR APPROACH
GCT
Diagnose First.
Then Decide.
An HVAC system that is underperforming does not automatically mean it needs to be replaced. Our role is to assess the system objectively and recommend the most appropriate engineering path.
01
Assess
Understand the existing system
02
Diagnose
Identify performance issues
03
Recommend
Define the right engineering solution
GEOTHERMAL HVAC
Cooling & Heating From the Ground Up.
Geothermal HVAC uses the relatively stable temperature of the earth as part of the heating and cooling system — creating an alternative approach to conventional HVAC.
Green Chill Tech brings specialized engineering expertise to geothermal cooling and heating applications, from system concept and feasibility through technical design and project support.
Geothermal System Design
Engineering approach for ground-source heating and
cooling applications.
Thermal & Load Analysis
Understanding building loads and system requirements
before defining the solution.
Sustainable HVAC Strategy
Integrating geothermal thinking into efficient,
long-term HVAC planning.
GROUND-SOURCE HVAC
GCT / 01
TOP SOIL
EARTH / GROUND
THERMAL ZONE
BUILDING
GROUND LOOP
EARTH THERMAL EXCHANGE
HVAC SOLUTIONS
HVAC Engineering For Real-World Applications.
Every building, process and operating environment has different HVAC requirements. We help evaluate, engineer and optimize systems around the actual application.
Discuss Your Requirement →
02
VRF / VRV
VRF / VRV Systems
Application-focused evaluation and engineering for variable refrigerant flow systems.
03
VENTILATION
Ventilation & Air Distribution
Ventilation, ductwork and air-distribution considerations for specialized and demanding environments.
04
PRECISION
Precision Cooling
HVAC engineering considerations for environments where temperature and operating conditions require greater control.
05
HEATING
Radiant Heating Systems
Engineering expertise covering radiant floor and related heating applications.
06
SPECIALIZED HVAC
Specialized HVAC Applications
Mission-critical, high-performance and technically demanding HVAC environments requiring application-specific engineering.
GCT
From conventional HVAC to specialized cooling and heating systems, the objective remains the same: the right engineering approach for the application.
ENGINEERING & CONSULTING
Better HVAC Decisions Start With Engineering.
From existing-system assessment to new HVAC planning, Green Chill Tech provides independent technical expertise to help understand the system, evaluate the options and define the right engineering approach.
01
UNDERSTAND
Technical Assessment
Review the existing HVAC system, operating conditions, application requirements and areas of concern.
02
ANALYSE
HVAC Performance & Load Analysis
Examine system performance, thermal requirements, energy considerations and engineering constraints.
03
ENGINEER
Design & System Optimization
Develop or refine the appropriate technical approach, including system selection, optimization and value engineering considerations.
04
EVALUATE
Tender & Vendor Evaluation
Support technical evaluation of specifications, tenders, vendors and proposed HVAC solutions.
05
SUPPORT
Project & Technical Implementation Support
Provide technical guidance during project execution, coordination and implementation where required.
AREAS OF EXPERTISE
Engineering knowledge that supports the decision.
01
HVAC Technical Audit
02
Energy Audit & Optimization
03
Heat Load Analysis
04
Value Engineering
05
Tender Formulation
06
Vendor Evaluation
07
Retrofit Advisory
08
Feasibility & Technical Advisory
HAVE A COMPLEX HVAC REQUIREMENT?
Consult an Expert
→
Let's understand the engineering before deciding the solution.
SELECTED PROJECTS
Engineering Experience Across Diverse HVAC Environments.
From geothermal cooling and large commercial systems to specialized ventilation and critical HVAC applications, our experience spans different building types, system architectures and technical requirements.
FEATURED PROJECT
01
GEOTHERMAL COOLING
GEOTHERMAL HVAC
Discuss a Similar Project
→
Vinit Sethi Residence
Luxury Residential Project
End-to-end ground-source geothermal cooling for a 9,000 sq.ft. luxury residential property.
APPLICATION
Geothermal Cooling
AREA
9,000 sq.ft.
SCOPE
End-to-End Engineering
02
FORCED VENTILATION
DIAL GMR Delhi Airport
Heavy-duty forced ventilation for Terminal 1 A & B and Arrival Hall applications.
03
CENTRAL HVAC
World Trade Park Jaipur
Central AC engineering including high-side and low-side engineering, air distribution and estimation.
04
VRF & CENTRAL HVAC
Bain Capability Center / Bain & Co.
Low-side central HVAC and VRF AC systems for a 58,000 sq.ft. corporate facility.
TECHNICAL EXPERIENCE
Experience that extends beyond one HVAC system.
GEOTHERMAL
CENTRAL HVAC
VRF / VRV
PRECISION COOLING
VENTILATION
MISSION CRITICAL
Have a technically challenging HVAC project?
Start a Conversation →
SUSTAINABILITY
Sustainability Designed Into the System.
Sustainable HVAC is not simply about selecting a greener technology. It begins with understanding the building, the climate, the system and the way energy is actually used.
GCT
GEOTHERMAL
Ground-source systems
ENERGY
System optimization
RECOVERY
Heat recovery systems
DESIGN
Application-led engineering
SUSTAINABLE HVAC ENGINEERING
ENGINEERING WITH PURPOSE
Efficiency is not an afterthought.
The most sustainable HVAC system is one that is properly understood, correctly engineered and appropriate for the application.
Our approach considers opportunities for geothermal systems, thermal load optimization, energy management, heat recovery, efficient system selection and retrofit-oriented thinking.
01
Use Energy Intelligently
Evaluate how the system operates before deciding
what should change.
02
Consider the Whole System
Look beyond individual equipment and understand
the interaction between system components.
03
Engineer for the Long Term
Balance performance, application requirements,
efficiency and practical implementation.
OUR SUSTAINABLE ENGINEERING FOCUS
Practical sustainability. Engineering-led.
Geothermal HVAC
Exploring ground-source and other geothermal opportunities where site and application conditions make the approach appropriate.
Energy Optimization
Reviewing HVAC operation and system requirements to identify opportunities for improved energy performance.
Heat Recovery
Considering heat-recovery approaches that can improve overall system efficiency while supporting fresh-air requirements.
Retrofit & Optimization
Evaluating whether an existing HVAC system can be optimized or technically improved before replacement becomes the default decision.
+
Better engineering can support better energy decisions.
CONSULT AN HVAC EXPERT
Have an HVAC System That Isn't Performing?
Before replacing equipment or committing to a major HVAC investment, understand what the system actually needs.
Green Chill Tech provides independent HVAC engineering and consulting for system assessment, diagnostics, optimization, geothermal solutions, energy efficiency and technically challenging cooling and heating requirements.
35+
Years of HVAC Experience
50+
Projects & Systems
GCT
Engineering & Consulting